Home : Gallery : History : Uses : Behaviour : Maths : Forum : Propulsion : Links : Glossary
Main Forum Page

The Gyroscope Forum

 29 November 2024 01:56

Welcome to the gyroscope forum. If you have a question about gyroscopes in general, want to know how they work, or what they can be used for then you can leave your question here for others to answer. You may also be able to help others by answering some of the questions on the site.

Search the forum:  
 

Question
Asked by: Thomas Ferko
Subject: Wanted 3 inch gyroscope. Must be able to disassemble
Question: I need a gyroscope that I can (center) shaft twist with 2 fingers to start the spin. It should lbe a brass disk with a long 1/4 inch non magnetic shaft going through the center. Disk about 3 inches in diameter with a 1/4 inch hole in the center. About 1/8 to 1/4 inch thick.

What I plan to do with this after I install a "DIAMETRIC" cylinder magnet on its center shaft is to keep the setup spinning for years. Not days or weeks! Please check out my U tube movie link below. I can spin any magnet with almost no power. The thought occured to me I could keep a well machined gyroscope
operating for years with power going off for a long duration and then kicked on for a second to bring the gyroscope up to speed. ALL DONE WITHOUT MANUALLY TOUCHING THE GYROSCOPE1111

lLet me hear from you if you can help or interested.

Thanks, Tom


http://www.youtube.com/watch?v=XlgFCIg0Dfs&feature=channel
Date: 26 August 2009
report abuse

Answers (Ordered by Date)
 
  • No answers yet
    • Add an Answer >>
    Website. Copyright © 2024 Glenn Turner. All rights reserved. site info
    Do not copy without prior permission. Click here for gyroscope products