Question |
| Asked by: |
Ted Pittman |
| Subject: |
GammaMax testing |
| Question: |
Now experimenting with automatic control of Gamma Drive device.
Recent test duplicating GM018 at: www.youtube.com/watch?v=DMR5Q1dFjhg |
| Date: |
22 October 2013
|
| report abuse
|
|
Answers (Ordered by Date)
|
| Answer: |
Glenn Hawkins - 22/10/2013 19:36:42
|
| | Dear Ted,
I don't want to be a kill-joy, but what is it you think you have shown? Any number of an in-uselessly varied array of none inertial pulses, or whatever, could create what I saw.
On the other hand, Sandy, Blaze and Nitro have demonstrated mechanical actions that can be followed and are perplexing; perplexing because they are clearly visioned and can be reasoned out correctly, or incorrectly.
Please, I am not intending to sound mean, but you should be told. You'll have to do better.
Kind regards and best wishes,
Glenn
|
| Report Abuse |
| Answer: |
Ted Pittman - 22/10/2013 23:12:33
|
| | The basis of my work is described in my earlier post: Gamma Report 3.
Just want to have some of my experiments on the record.
I am in the process of patenting the Gamma Drive. Explicit details will follow afterward.
|
| Report Abuse |
| Answer: |
Ted Pittman - 03/12/2013 00:09:55
|
| | The principle by which early Gamma Drives worked is excellently described in this post:
Luis Gonzalez - 26/12/2005 03:47:47
|
| Report Abuse |
| Answer: |
Ted Pittman - 13/12/2013 14:58:40
|
| | Better and Better.
http://www.youtube.com/watch?v=NRIzngOGIp8
|
| Report Abuse |
| Answer: |
Ted Pittman - 29/12/2013 08:44:32
|
| | Top view of Gamma Test 034
http://www.youtube.com/watch?v=9vrY8oVh7uI
A 10 oz GyroDisk lifts a 9 lb device 4 inches, against an equal counter-weight.
|
| Report Abuse |
| Answer: |
Nitro - 29/12/2013 09:47:39
|
| | Dear Ted
If, as you say, this is lifting the device's nine pound weight against an equal (weighted) counter weight it is only overcoming the (pulley?) system's friction. As it takes ages to do this and due to the visibly large amount of vibration it seems likely that what we are watching is stick/slip occurring and not a potential for inertial drive.
If it were to lift a weight and return when switched off then there could be something there but otherwise............
NM
|
| Report Abuse |
| Answer: |
Nitro - 29/12/2013 13:03:28
|
| | Dear Ted
Further to my above:-
1. Have you tried to get it to lift increasing weights to see how much lift - if any it can produce?
2. When in its raised position have you tried (with it switched off) placing increasing weights on it to see what weight is required to overcome the counterweight system's friction and return it to its start position?
NM
|
| Report Abuse |
| Answer: |
Ted Pittman - 01/01/2014 04:27:32
|
| | Thanks for your comments and suggestions, Nitro.
More test are planned...
|
| Report Abuse |
| Answer: |
Ted Pittman - 03/06/2014 13:48:23
|
| | Response to stick/slip comment: https://www.youtube.com/watch?v=Ub6kL5aiclM
|
| Report Abuse |
| Answer: |
Ted Pittman - 14/12/2014 02:57:06
|
| | About Stick-slip: https://www.youtube.com/watch?v=3rNope82fOI
|
| Report Abuse |
| Answer: |
Nate - 08/08/2016 18:40:59
|
| | See new update dated August 8, 2016.
Links to videos showing unmasked equipment.
|
| Report Abuse |
| Add an Answer >> |
